the finished doors in place

 Jane trying out the display surfaces

 Our test run camping trip to Martinak state park

 lots of critters

Passed inspection

 hooked up to head out to inspections station

back from inspection passed with flying colors.... Yea!

Another productive weekend

 the rest of the furniture installed

 the new carpet in

 Cleaning up the stove top with vinegar

 the top needed the most work

 The Bodies! The cushions still drying after their bleach treatment.

 kitchen counter and new faucet. the tambour doors on this cabinet are shot.

 so I just so happened to have some walnut lying around and made up some proper cabinet doors using the tambour as the center to match. (saw someone else do this on the airfourm).

hoping that these weight distribution parts all work together.

 Getting ready to install the bathroom

 I am starting at the back and working my way forward

 connecting the wiring for the bathroom vanity

 upper cabinet re installed

 Bathtub installed

 under sink

 new vinyl floor

 sink and tub backsplash installed

new toilet installed had to loose the toilet seat cover as the new toilet is taller then the original.

 This old peaterbuilt was the donor for all the new aluminum belly skins .

 bedroom installed (except bed and overheads)

tools of the trade..

Ok the weather has finally gotten a bit warmer so I got a lot done this past weekend 

 ran all the new propane lines. I rerouted them to be in less precarious positions.

 re installed the command centre with the added new water heater switches.

 The second round of retro brite went much better than the first I am quite amazed at how much whiter everything got. some pieces required more work than others but all are looking good now.

 cushions ready for there bleach and water bath to kill any mold thats in them. (notice how helpful my wife is being in the background)

the makeshift cushion bath.

Wow am I behind on the blog

 cleaned up and repared holes in the belly wraps. I now like to refer to it as Frankinbelly

 building a belly drawer for storage.

 one side made

 assembly

 ready for clean up and installation

 installed the heat vent for the waste tanks. lets keep that poo from freezing!

 first attempt at retrobrite

 not very successful. (but stay tuned it works out better next time)

 Installing the belly wraps

 Also added the rear belly skin

this is the drawer slide.

 Ok got most of the rough plumbing finished up

 I dont think this wire was hooked to anything????

 Or this one???

 Dad came over to help

and determined that the water pump is dead........  

 AAAAAAAHHH another leak .... ok it was just a loose rivet but I had to dismantle half the wall to get to it very frustrating.

I got the drains and vents re installed as well as put the firdge in place. moving right along.